Wilson Combat / Vickers Sight Set – Glock 42 / 43 / 43x / 48 – Gold Bead – The Bus Mods – Omsi 2 Mods

Wilson Combat / Vickers Sight Set - Glock 42 / 43 / 43x / 48 - Gold Bead

$113.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Haysville, Kansas, United States
Ships to: US,
Item: 233281158537

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
For Gun Make:Glock
Glock 42 / 43 / 43x / 48:Glock 42 / 43 / 43x / 48
Modified Item:No
Country/Region of Manufacture:United States
Custom Bundle:No
Specific Part:Sight Set – Front & Rear
Non-Domestic Product:No
Style:Gold Bead (.080″ Diameter)
Type:Sights
Sight Height:.200″
Material/Finish:Black Parkerized finish
MPN:902BGB
For Gun Type:Handgun
For Gun Model:Glock
Wilson Combat:Wilson Combat
UPC:Does not apply

eBay Wilson Combat / Vickers Elite – Snag Free Sight Set for Glock Model: 902BGB Style: Gold Bead (.080″ Diameter) Finish: Black Parkerized finish Height: .200″ Fits: Glock 42 / 43 / 43x / 48 Brand new & factory sealed Product Description: Snag Free Front Sight, Gold Bead (.080″ Diameter), Vickers Elite for Glock® .200” • .200” Height • Gold Bead (.080″ Diameter) • Glock® Vickers Elite Replacement Front Sight for Glock 42/43/43x/48 Models • Can be Filed to Desired Height • Black Parkerized Finish Note: Sights may require minor fitting and may not be returned after installation. These front sights are taller than factory Glock® and not compatible with standard factory rear sights without adjusting the sight height. The Vickers Elite Battlesight rear has a .145” wide, deep U-Notch for optimum sighting in low-light, dynamic range conditions and is a perfect match to our .125” wide front sights. The concave non-reflective rear blade is serrated 40 lines per inch, while the notch area is recessed into a semi-circular pocket for a crisp, protected sight picture. Two hardened set-screws ensure this sight will never shoot loose under the most demanding conditions. This snag-free rear sight also has a shelf shape that enables one-hand slide cycling or malfunction clearance and a rugged, non-reflective matte black parkerized finish. The Vickers Elite Battlesight is available with two dot Tritium and plain black serrated rear blades and your choice of black serrated, green/red fiber optic, tritium and genuine, never dulling gold bead front sight styles. The high profile of the Vickers Elite Battlesight allows the use of a taller front sight and deeper rear notch for better sight tracking during high speed shooting situations. Once you try this sight system you will be convinced that the Vickers Elite Battlesight is the best performance upgrade you can make to your Glock® 42/43 pistol! Larry Vickers is a retired US Army 1st SFOD- Delta combat veteran with years of experience in the firearms industry as a combat marksmanship instructor and industry consultant. NOTE: Sights may require minor fitting and may not be returned after installation. Glock® Rear Sight Installation FAQ Remove the magazine and make sure your pistol is unloaded. Remove and Field strip slide assembly and secure the slide in a padded vise. Remove existing rear sight with hammer and punch. Clean rear sight dovetail and press in new rear sight from right to left. If rear sight will not start into approximately 50% of the dovetail you may need to remove very small amounts of material from the bottom and sides of the dovetail portion of the rear sight-usually just a few light passes will do. A safe sided dovetail file, small diamond hone or sanding stick are good tools for this. Go slowly and check your fit. Once you are able to get 50% of the sight base into the dovetail attempt to tap the sight in place with a hammer and non-marring punch/dowel (wood, polymer, aluminum) or appropriate sight pusher. If using a steel or brass punch protect the sight/punch with several layers of duct tape. Fine adjust your windage with a rear sight armorer’s tool or non-marring punch. After you fine adjust rear sight windage install dual locking screws with a thread locking compound like Loctite on the threads. Note-if the rear sight is loose in the dovetail your dovetail is cut oversize and the new rear sight may require peening on the edges of the dovetail for a proper fit. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither Wilson Combat, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H products

Frequently Asked Questions About Wilson Combat / Vickers Sight Set – Glock 42 / 43 / 43x / 48 – Gold Bead in My Website

thebusmods.com is the best online shopping platform where you can buy Wilson Combat / Vickers Sight Set – Glock 42 / 43 / 43x / 48 – Gold Bead from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Wilson Combat / Vickers Sight Set – Glock 42 / 43 / 43x / 48 – Gold Bead on thebusmods.com?

Frequently Asked Questions About Wilson Combat / Vickers Sight Set – Glock 42 / 43 / 43x / 48 – Gold Bead in My Website

What are the best-selling Wilson Combat / Vickers Sight Set – Glock 42 / 43 / 43x / 48 – Gold Bead on thebusmods.com?

Leave a Reply Cancel reply