WD-012 NATIKA Backup/Front View Camera for Cars Pickup Trucks SUVs Van (Black)

$22.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store pangyu
(1321) 98.0%,

Location: Portland, Oregon
Ships to: US,
Item: 186193544501

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:14 Days
Refund will be given as:Money back or replacement (buyer’s choice)
NATIKA:NATIKA
MPN:WD-012

NATIKA Backup/Front/Side View Camera: No Distortion Effect Starlight Night Vision HD Metal Flush or Surface Mount CVBS | AHD Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs VansBackup camera flush mount with a LATEST 6pcs FULL glasses large-aperture optical system,the picture with very low distortion rate,you will get crystal realistic view when you backing up. Also it with a horizontal 135 degree wide view angle lens,it’s great for you to check the invisible blind spot clearly and make parking safe and simple.Rear view camera surface mount support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, so the waterproof effect is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a FACTORY RADIO.Reverse camera flush mount support both CVBS and AHD video signal output(great for Android stereos).CVBS by default,cut the purple wire loop to choose AHD format video signal (AHD,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance),you never worry about parking during night, rainy day or in dark garage.Car backup camera’s housing is metal,2 in 1 installation option design(surface or flush mount option).Also it is built in 3 multifunctional switching loops: cut the white loop for front view, cut the green loop to remove the guidelines and cut the purple loop to choose AHD format(AHD,720P,30fps)video signal output.Beware: According to our experience, some cheap or old Android stereos have the setting of AHD format video signal input option, but the truth it does not work, because their hardware inside do not support it. If so, please use the default CVBS video signal output (do not cut the purple wire loop, otherwise you will get a black screen).This backup car camera flush mount doesn’t fit sucked type dash cam and mirror dash cam, because these dash cam have different connectors and inside PIN definition, even some of them with same size 4 PIN connector. If connect this hitch flush mount backup car camera to a GPS navigator, such as Garmin or TomTom, please separately order one more adapter which with a RCA to 2.5mm connector to complete installation.Before you cut this flush mount car backup camera’s purple wire loop to choose AHD format 720P 30fps video signal output, please make sure your Android stereos support AHD format video signal input first(most of old Android stereos do not support it,and it works well on selected ATOTO car stereos (work well on F7 Series, S8 series and A6 KarLink version,can not work on ATOTO A6Y Series Android stereo or SA102 Starter). NATIKA backup camera WD-012 support flush or bracket mount option, no distorted & fish-eye effect, starlight level night vision,IP69K IP rating reliable waterproof and horizontal 135 degrees wide view angle.Useful Wire/Loop Control Design:Reverse camera WD-012 with 2 small wires/Loops (White and Green color).*If you need the guide line, please keep the green loop; If no need, just cut it; If you use it as a front view camera, please cut the white loop;*If you use it as a front view camera without guide line, please cut both white and green wire/loop; If as a side view camera, please rotate the middle housing part of the camera (maximum 360 degrees) to get a prefer view angle; Look backward, keep the white loop; look forward, cut the white loop.*Note: this camera is a rear view camera with guide line/parking line as DEFAULT.*Please power on again after you cut the small loops, then the image should be correct.What you get:1 x NATIKA Backup Camera; 1 x 26ft/8M Extension Wire; 2 x 304 Stainless Screws; 1 x Double Tape; 1 x User Manual; 1 x Electrical Tape; 3 x Wire Clamps; 1 x Panel Remover; 7 x Zip Ties; 1 x NATIKA Gift Box; 1 x Thanks Card; 1 x 0.886in/22.5MM TCT Hole Saw; 1 x 304 Stainless Bracket; 1 x Metal Front HousingNotes:*This NATIKA rear view camera WD-012 is perfect for REAR, FRONT and SIDE view.*If connect this NATIKA backup/front/side view camera WD-012 to a FACTORY RADIO, please separately order a suited Harness & Programmer to complete installation, because different RADIO need different Harness & Programmer to work together.* Mount this reverse camera on the panel and route the wire to inside (DO NOT pinch the wire/cable when route the wire, pinched wire will damage the camera, drill a hole to allow the wire go through if needed).* If your head unit with a reverse triggering wire, normally it is a purple/white, blue/white or pink color wire, please find it, and connect it with the extension wire’s triggering wire well(small short red wire next to the RCA/AV connector).*If the image on the screen is blurry, flickering/flash or has horizontal or vertical strip, please check all your power and video connections. Possibly use a different ground point(iron part) and wrap power and video plugs with electrical tape to insulate from interference. If it still with blurry, flickering/flash or has horizontal or vertical strip, please order a 12V DC power adapter filter rectifier to solve it, especially need for Dodge VW AUDI BMW Mercedes Benz brands vehicle.*Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works.* If you use wire clamps for connection, please kindly check and see if it works(connection is solid or not).*For camera connection: connect the camera’s male plug to female connector of the extension wire/cable, make sure the arrows to align and push the camera’s male plug tightly into the female connector of the extension wire.*If the camera is mounted offset, the guidelines on image will be offset.*Ideally to mount the camera at the middle of the trim. If mount the camera at side, it still works, but with guide line offset.*Guide line is for reference only, please use the mirrors for position when backup.*Apply electrical tape for the joint of all for the connectors, and use zip ties to fasten the wire on your vehicle.*Seal the red wire next RCA/AV connector with electrical tape if you do not use it.*If you want to get a perfect view angle, before you use a drill rig to make a hole, please seriously check and test to find where is the best spot to mount this reverse camera,please rotate the middle housing part of the camera (maximum 360 degrees) or move the bracket (maximum 90 degrees) to get the best view angle.

Frequently Asked Questions About WD-012 NATIKA Backup/Front View Camera for Cars Pickup Trucks SUVs Van (Black) in My Website

thebusmods.com is the best online shopping platform where you can buy WD-012 NATIKA Backup/Front View Camera for Cars Pickup Trucks SUVs Van (Black) from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling WD-012 NATIKA Backup/Front View Camera for Cars Pickup Trucks SUVs Van (Black) on thebusmods.com?

Frequently Asked Questions About WD-012 NATIKA Backup/Front View Camera for Cars Pickup Trucks SUVs Van (Black) in My Website

What are the best-selling WD-012 NATIKA Backup/Front View Camera for Cars Pickup Trucks SUVs Van (Black) on thebusmods.com?

Leave a Reply Cancel reply