Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit

$61.04 Buy It Now or Best Offer
free,30-Day Returns

Seller Store oranshlomo1986
(1240) 99.5%,

Location: Casper, Wyoming
Ships to: US,
Item: 186834263961

All returns accepted:ReturnsNotAccepted
Package Dimensions LxWxH:8.66×8.58×2.32 Inches
Weight:1.08 Pounds
Type:Does not apply
VENHILL:VENHILL

High-quality, “build-your-own” cable kit suitable for generally any motorcycle throttle application with a push-pull style throttle. The ends of the inner wires are fitted with a 6mm dia x 5mm nipple. The opposite end will need to be cut to length and the required nipple soldered into place. PLEASE NOTE: We strongly discourage the use of a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle. We recommend dipping the wire ends in a solder bath, such as that in a solder pot. The ferrules are a snug fit. They may be bonded into place, or use a center punch to make a small indention in the side. The throttle kit includes: 2 x 1.35 meters (4.4 feet/54.8 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit 2 x 2 meters (6.5 feet/78 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand) 1 2-piece plastic angled wire guide 1 ferrule bend with swivel nut, throttle open, “Honda” 1 ferrule bend with swivel nut, throttle close, “Honda” 1 ferrule bend with mounting tab, throttle open, “Suzuki” 1 ferrule bend with swivel nut, throttle close, “Suzuki” 2 ferrule bends, zinc coated 2 ferrules, 5mm OD nose 2 ferrules, 6.5mm OD nose 2 ferrules, 5.5mm OD nose with groove 2 6mm x 1.00 x 25mm adjusters 1 tapered double boot 4 adjuster boots 2 brass barrel nipples, 6mm DIA x 10mm (2.1mm bore) 2 brass barrel nipples, 6mm DIA x 8mm (2.1mm bore) 2 solderless barrel nipples, 6mm DIA x 8mm 2 solderless barrel nipples, 5mm DIA x 7.5mm 2 tab washers High-quality, “build-your-own” cable kit suitable for generally any motorcycle throttle application with a “push-pull” style, two cable throttle. This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike. The conduit is spiral wound steel covered with tough black PVC. The inner liner is Teflon for smooth action and zero maintenance. The wire is galvanized steel for long life and easy soldering.

Frequently Asked Questions About Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit in My Website

thebusmods.com is the best online shopping platform where you can buy Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit on thebusmods.com?

Frequently Asked Questions About Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit in My Website

What are the best-selling Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit on thebusmods.com?

Leave a Reply Cancel reply