Star Trek, HERO Metal Fin Replacement, Metal Phaser Part

$15.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store susannetrek
(2968) 99.3%,

Location: Sarasota, Florida
Ships to: US,
Item: 232424460760

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:14 Days
Refund will be given as:Money Back
Return policy details:
Convention/Event:New York Comic Con
jonpaultrek2012 ®:jonpaultrek2012 ®
Type:Phaser
Character:Captain Kirk
Signed:No
Series/Movie:Original Series
Genre:Science Fiction & Horror
Franchise:Star Trek
Character Family:Star Trek
Vintage:No

Type II Phaser, Star Trek, Phaser Metal Parts, Hero Rear Fins CLICK FOR HOW-TO-FINISH A FIN CLICK FOR MIDGRADE METAL FIN Star Trek, TOS, Phaser HERO Metal Fins, fits; AA/DS and all similar shells, Type II Phaser Bodies PRICE IS FOR EACH FIN BLOCK. Photo’s include this item shown installed on a phaser body. These photos are for context reference only. Visit here to see more parts: FITS: AA/DS Star Trek TOS Type II Phaser, Metal Fins, these will fit directly onto an AA/DS Phaser and are easy to fit to all other P2 bodies. Hand Machined aluminum, polished, Acute Trapezoid shape as TOS original. Dimensional Design details primarily based on Roddenberry Hero Resin Kit. Can fit all other prop kits. You are the prop maker!! Check out the awesome jewelry like finishes. These are milled “one-at-a-time” from a single block of 6063-T5 (HE-6) aluminum, just gorgeous. NOT cast zinc. NOT extruded aluminum that is chopped and polished. Fitting to the toy phaser or or other prop, such as fiberglass or resin, is most likely required. Not a drop in part most of the time. Dimensions: 1.418 o.a. x .9510 o.a. wide x 3/8″ thick. Notch to fit into P2 is .495 wide x 3/8″ high. Photo shows: (a) fin mounted on a phaser end with the corners slightly sanded-off and some 200 grit graining added to other surfaces and black paint inside fin gaps. Paint Fins black then sand off the corners and flat edges to duplicate this look. You do that part. (b) two loose fins are shown on the pristine condition as they will ship to you. The aluminum is NOT ANODIZED and is of a more workable alloy type than others on the market. Why?, I used a special 6063-T5 (HE-6) un-anodized aluminum because it is workable by a prop builder. Anodizing hardens the material surface and that’s not always good because anodizing makes it difficult work the component. Not anodized because anodizing makes it hard to; machine, grain and/or, further polish, the Fins. CLICK; EXPLODED PHASER LASER SLIDESHOW; YOUTUBE VIDEO CLICK; AA/DS PHASER-LASER HOW-TO; YOUTUBE VIDEO CLICK; TOS-PHASER FIN FINISHING; YOUTUBE VIDEO CLICK; TOS-PHASER SIDE-RAIL FINISHING; YOUTUBE VIDEO CLICK; TOS BRASS BUTT & OVAL HANDLE YOUTUBE HOW-TO METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. THE RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as “Dawn” or “Palmolive” to insure a clean part. CLICK BELOW FOR:MY YouTube CHANNEL Some Star Trek Prop History For Inquiring Minds: Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories) The persons quoted worked for; Desilu ®, NBC ®, Paramount ® & Gene Mr. Bob Stone was Star Trek’s machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. NOTICE © and TM 2021. jonpaultrek2012 ® is a registered trademark with the United States Patent and Trademark Office Reg. No.6,431,925 The products sold here are all jonpaultrek2012™® & © 2023 works, are all; custom manufactured & engineered. Jonpaultrek2012 And related marks and logos are trademarks of Jonpaultrek2012 LLC. All Rights are hereby explicitly Reserved. United States Patent & Trademark Office Reg. No. 6,431,925.The jonpaultrek2012 company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author’s Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America.

Frequently Asked Questions About Star Trek, HERO Metal Fin Replacement, Metal Phaser Part in My Website

thebusmods.com is the best online shopping platform where you can buy Star Trek, HERO Metal Fin Replacement, Metal Phaser Part from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Star Trek, HERO Metal Fin Replacement, Metal Phaser Part on thebusmods.com?

Frequently Asked Questions About Star Trek, HERO Metal Fin Replacement, Metal Phaser Part in My Website

What are the best-selling Star Trek, HERO Metal Fin Replacement, Metal Phaser Part on thebusmods.com?

Leave a Reply Cancel reply