Polymer Crowncut Crown Molding Cutting Jig

$47.16 Buy It Now or Best Offer
free,30-Day Returns

Seller Store preechatty_classic
(1164) 99.5%,

Location: Phoenix, Arizona
Ships to: US,
Item: 175801919507

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Return policy details:
Color:Silver
EAN:6287323106013
ISBN:6287323106013
Package Dimensions LxWxH:15.51×6.1×4.02 Inches
Weight:1.3 Pounds
MPN:Does not apply
Does not apply:Does not apply
Bench Dog:Bench Dog

Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig Crown-Cut crown molding cutting jig. The safest and easiest way to cut crown molding. Eliminates trial and error. Made from durable polymer in the USA. Fits all 10″ and larger miter saws. From the Manufacturer Set-up guides are mounted to the tool for error-free operation. Be sure to load the moulding upside down. The fence risers should extend to the top of the moulding, just enough to support it. Both mating surfaces on the moulding should fit as closely to the tool as possible. Tighten all screws, knobs, and bolts before use. Store the risers in the down position when needed for larger moulding. Crown/Cove Cutting Jig Cutting crown molding doesn’t have to be difficult. Crown-Cut eliminates the complication of cutting crown and cove molding, giving you perfect miters, every time. What’s the secret? Crown-Cut holds the molding at its intended angle while you cut it. No more compound cuts and tedious trial and error. Before Crown-Cut, miscalculated compound cuts produced sloppy miters that screamed for caulk and paint. Even if you’re using the coping method for inside miters, Crown-Cut will prove useful for the initial cuts. For a professional looking job, cut your crown and cove the easy way. User Instructions With Crown-Cut you must use the “upside down and backwards” cutting method. This means you always cut the moulding upside down. To understand why we cut the moulding upside down, it may help to visualize the miter saw table as the ceiling, and the the miter saw fence as the wall. In other words, imagine that it’s the saw that is upside down, the moulding. Why it’s also called “backwards” is because the left piece on the wall is the right piece on the saw, and the right piece on the wall is the left piece on the saw. This makes sense because you’re cutting the moulding upside down. In other words, left is right, and right is left. Be sure to always cut the moulding upside down and follow the cutting guides on the tool. Please consult the many DIY books and articles on installing moulding, as this is beyond the scope of the Crown-Cut owner’s manual. Also, be sure to check our website for new information about this tool. We can tell you from experience that most mistakes happen from incorrect cuts or incorrect measuring. Crown-Cut is your solution for incorrect cuts. You are the solution for incorrect measuring. Measuring twice and cutting once is always good advice. For more accurate results, use the help of another person when measuring your moulding lengths. Four Basic Cuts There are four basic cuts you will make with Crown-Cut: INISIDE CORNERS (90 degree), OUTSIDE CORNERS (90 degree), LEFT OVER RIGHT SPLICE JOINTS, and RIGHT OVER LEFT SPLICE JOINTS. Splice joints don’t always fit perfectly because of differences in your moulding’s profile. Staging the overlap of the splice joint to fit your room will help hide the differences. A good rule of thumb to follow is this: if you entered the room and could see the splice joint to your right, use the right over leftsplice joint. If you entered the room and could see the splice joint to your left, use the left over right splice joint. If your walls are out of square, adjust the angle accordingly. Be sure to test fit using scrap pieces of moulding. Before cutting, read the Safety Rules. Read These Safety Rules Before Cutting: Keep hands at least 4 inches from saw blade at all times. Always cut the moulding upside down. Always position Crown-Cut on the miter saw so the tool clears the blade path by at least 1/2 an inch. Hold tool and moulding securely against miter saw fence. Allow the blade to come to a complete stop before lifting the blade and removing the moulding. Provide adequate support for long pieces of moulding. Don’t cut or recut pieces shorter than 7 inches. Never cut cross-handed. Always wear safety glasses and ear protection. Don’t wear loose fitting apparel. Be sure saw blade is sharp and properly installed. Avoid cutting nails and knots. Read and follow your saw’s owner’s manual and safety warnings before using this tool. Don’t remove cut-off pieces before the blade has stopped. Childproof your workshop with locks and master switches. Disc SHIPPING Domestic Buyers – We ship within 3 business days of payment, usually sooner – We offer FREE shipping on all orders! – We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed – We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund. International buyers – please note: Import duties, taxes, and charges aren’t included in the item price or postage cost. These charges are the buyer’s responsibility. – Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. * Order Cancellation Policy ** You can return a product for up to 30 days from the date you purchased it. 1. The seller reserves the right to cancel the special case only due to eBay cancellation fee. 2. The decision of seller is the final. 3. The seller will respond to the cancellation request within 2 business days. Please wait for the result of cancellation. 4. In case the cancellation is not completed by some reasons, the buyer can follow the options below to get the refund. 4.1 The buyer can reject the item when it arrives. 4.2 The buyer can send the item back to the seller within 30 days If the buyer receives item (USA Shipment ONLY). The seller will provide the FREE return label to the buyer when the buyer opens ” Return Item” case on eBay by using the reason as “Change my mind” ONLY. 5. When buyer has placed the order. The order will be processed and completed by automatic warehouse system within 5 minutes. In case that buyer sends the cancellation request after 5 minutes of placing the order, the request will be rejected.**Sending direct message to cancel the order is not allowed for every case.*

Frequently Asked Questions About Polymer Crowncut Crown Molding Cutting Jig in My Website

thebusmods.com is the best online shopping platform where you can buy Polymer Crowncut Crown Molding Cutting Jig from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Polymer Crowncut Crown Molding Cutting Jig on thebusmods.com?

Frequently Asked Questions About Polymer Crowncut Crown Molding Cutting Jig in My Website

What are the best-selling Polymer Crowncut Crown Molding Cutting Jig on thebusmods.com?

Leave a Reply Cancel reply