New 46.5" long Fujikura Ventus 5R- 55 reg. shaft w/all Taylormade Dvr-FW sleeves – The Bus Mods – Omsi 2 Mods

New 46.5

$180.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store jstrsr
(2476) 100.0%,

Location: Kalispell, Montana, United States
Ships to: US,
Item: 185513912497

Condition:New other (see details) A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. See all condition definitionsopens in a new window or tab
Seller Notes:“shaft is in New condition uncut at 46.5 inches long, it is for a driver or fairway wood and will … Read moreabout the seller notes“shaft is in New condition uncut at 46.5 inches long, it is for a driver or fairway wood and will include the listed sleeve installed & I will trim it to fit the buyer’s specs at time of purchase, plus install the sleeve & grip that the buyer chooses from my stock selection” Read Lessabout the seller notes
Fujikura:Fujikura
Shaft Type:Driver or Fairway Wood shaft
Ventus Blue 5R 55G regular shaft:Ventus Blue 5R 55G regular shaft
Tip Diameter:0.335
Flex:Regular
Material:Graphite
Item Length:46.5 in

eBay Note: I will be closing down my listings on this item & others on Sept. 29th as I have Surgery on Oct. 2, so anything purchased on the 29th will be shipped on Sept. 30, so beware of this upcoming change, thanks Sam NOTE: I now have several of the blue colored Ventus Blue 5R shafts at this time, besides the red/black colored versions of this shaft, they all have very similar numbers, even the Velocore versions which cost a lot more than these OEM versions & the buyer can pick which one they want by the numbers at the butt, mid & tip. I just did a set of three here locally, frequency matching all 3 & the buyer couldn’t believe the difference, he was crushing not only his Driver, but his two Fairway Woods as well. This is the Non-Velocore Version shaft & even though it’s not a Velocore version, it has very similar numbers to one I had & sold locally & the numbers on this shaft are actually better than the Velocore version, all shafts are slightly different from each other & the flex range is quite wide, with some having slightly stiffer or softer butt sections than the others or stiffer/softer mid or tip sections, I measure each shaft individually at the butt, mid & tip section, this gives the buyer the shafts true profile & that is the one I ship to the buyer, if I have multiple shafts of each one listed I give the buyer the choice of which one they want with their purchase, I will list the shaft numbers down below & have listed the numbers at the butt, butt2, mid & tip, & the buyer should pick the shaft that has the best numbers for their swing regardless of the shafts paint scheme. Up for sale on Buy-It-Now for 180.00, is a new, uncut 46.5 inch long, with the sleeve installed, Fujikura Ventus Blue 5R 55 gram regular shaft, which has a low torque rating of 3.5 which will not allow the shaft to open up no matter how hard you can swing, this shaft is in New unused condition & for a Driver or Fairway wood shaft in regular flex & will be installed with any of the Taylormade, Driver or Fairway Wood sleeve installed, such as the newer Stealth series or the Sim series, or the M-1-6 Series, SLDR, R-1, R-15, Jetspeed, RBZ Stage 2, Original One Mini, Driver or Fairway Wood sleeve installed or the earlier sleeve for the R-9, R-11, R-11S, RBZ, Driver or Fairway Wood sleeve installed or the first sleeve for the R-7 CGB Limited Driver sleeve installed. The shaft will come with a new grip of your choice of which I have many from Golf Pride, Winn, Lamkin, Iomic and many others in all sizes, even many O.E.M. Taylormade stock grips. I will also build the shaft to your specs, for length, sleeve setup and ship it out as soon as I get it built to the buyer’s specs, once it has been purchased, this is the shaft that is most used by many Tour Players today in their Driver or Fairway Woods, a very well preforming shaft for players that want a mid/high kick with a stiff tip for a low/mid ball flight with low spin that will allow the ball to roll out after it lands, this shaft as mentioned has a pretty stiff tip section to keep the spin down over softer tipped higher launching, higher spinning shafts, this depends on the players swing speed, launch conditions, shoulder plane & driver loft as well. It suits players with a mid to fast tempo, since the butt section is a little stiffer than the other shafts I have listed the numbers from in 4 places on this shaft and compared it with several others that I have listed to help the buyer better evaluate not only this shaft but others as well, keep in mind that the shafts profile can help you with your accuracy, striking the ball at impact in the sweet spot and distance when it matches your swing parameters, such as tempo, shoulder plane, launch conditions, swing speed & other factors, it has a really low torque value at 3.8 degrees, so it will not open up at impact, even with higher swing speed swings. If the shaft is left at the uncut length it will play 48 inches long after the buyers clubhead is installed, this also keeps the butt section softer and correlates to the numbers listed below as all shafts listed in this comparison are at the full 46 inch uncut length, if left at the longer length, it will increase your swing speed 6-10 mph over a 45 inch driver, because the arc is longer, I have many customers using the long shaft to increase their distance & accuracy, one customer in Neveda is 6’7″ & hits his T/M Sim 2 close to 375 yards, if you have other questions or need help with any shafts I have listed and how they compare to this shaft and will help with your swing or help in picking a shaft, please let me know. SHAFT Butt Butt 2. Mid Tip sold 1. Ventus Blue 6R 60G reg 3.645 4.170 4.845 8.965 sold 2.UST VTS TPX 5R 55G reg 3.075 3.180 3.705 8.105 sold 3. Fujikura Atmos Blue 6R 60G reg 3.270 3.535 4.305 9.490 sold 4. Proj. X Evenflow Green 5.5 55G reg 2.980 3.725 4.605 8.430 5. Fuji Ventus Blue 5R 50 Gram Reg 3.050 3.180 4.290 8.310 sold 6. MRC Tensei AV 55 G reg 3.560 3.855 4.455 9.875 sold 7. MRC Tensei AV Raw 60G reg 3.310 3.820 4.785 8.820 8. Fuji Ventus Blue 5R 50G reg 2.800 2.965 4.170 7.715 9. Fuji Ventus Blue 5R 50G reg 2.865 2.980 4.110 7.890 10.Fuji Ventus Blue R/B 5R 50G reg 3.020 3.150 4.265 8.555 11,Fuji Ventus Blue TR R/B 5R 50 reg 3.085 3.160 4.540 8.485 12. Fuji Ventus Blue TR R/B 5R 50 reg 2.980 3.085 4.865 8.880 NOTE: all of these shafts I have in stock, at the time of this listing but haven’t had time to list them all yet, I also have them for sale locally so they may be gone & no longer for sale, and as I get others or sell these that are listed will update the list, these numbers relate to the profile of the shaft, the larger the number the stiffer it plays at that section, even though the butt section numbers don’t show much difference, remember this reading is right below the grip, so a small difference can make a much larger difference in how the shaft loads & feels, basically the softer the butt the more it loads on the downswing & the more it unloads at impact, accelerating the head through the ball at impact. The two butt readings are 6 inches apart, so if the shaft is trimmed to play shorter the reading is going to be stiffer than at the full 46 inch length & by how much it is shortened depends on how much stiffer it will be, if you want to know how much let me know what length you want the shaft to be, for the best accurate way of doing this is to remove your shaft from the head & measure it from the end of the sleeve to the end of the grip, as there isn’t any standard playing length anymore with stock drivers. The tip and mid sections help determine spin and launch also in conjunction with the butt section, meaning a softer butt will lower launch whereas a softer tip or mid section adds spin and launch, if the ball has to much spin it won’t roll out after it lands causing it to plug & balloon in the air, I also want to state that if we had several of these same exact shafts the numbers would be different, as the shafts companies can’t make them the same, case in point, I recently had 3 of the Fuji Atmos Blacks, which I bought for a customer in another country, because he wanted 2 with different sleeves on them, I measured all 3 & sent him the numbers, the two he picked were the two softer ones, so remember if you try someone else shaft & it feels really good & think if you get the same it will be the same, there is a very small chance that it is going to happen, I have measured thousands of shafts & the two I sent him were as probably as close together as any two I have found in over 15 years of doing this & they weren’t exactly the same either, but were reasonably close as any I have measu

Frequently Asked Questions About New 46.5″ long Fujikura Ventus 5R- 55 reg. shaft w/all Taylormade Dvr-FW sleeves in My Website

thebusmods.com is the best online shopping platform where you can buy New 46.5″ long Fujikura Ventus 5R- 55 reg. shaft w/all Taylormade Dvr-FW sleeves from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling New 46.5″ long Fujikura Ventus 5R- 55 reg. shaft w/all Taylormade Dvr-FW sleeves on thebusmods.com?

Frequently Asked Questions About New 46.5″ long Fujikura Ventus 5R- 55 reg. shaft w/all Taylormade Dvr-FW sleeves in My Website

What are the best-selling New 46.5″ long Fujikura Ventus 5R- 55 reg. shaft w/all Taylormade Dvr-FW sleeves on thebusmods.com?

Leave a Reply Cancel reply