HYUNDAI OEM 6 Button Key Fob Dealer Installed Remote Car Starter GOH-PCGEN2 fab

$75.59 Buy It Now or Best Offer
free,30-Day Returns

Seller Store u.s.autoparts
(15884) 97.7%,

Location: Wellsboro, Pennsylvania
Ships to: US,
Item: 226267007455

Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Modification Description:DEALER INSTALLED KEYLESS ENTRY REMOTE
Battery::(2) CR2016
Warranty:60 Day
Color:Black
Manufacturer Part Number:FCC ID FCCID GOHPCGEN2 car starter 0000-8F-H07 P3465
Modified Item:Yes
California Prop 65 Warning:N/A
Hyundai:Hyundai
Frequency::433 434 433MHz 434MHz MHz
2-Way Paging:No
Unit Type:Unit
Stock#:174A Hyundai “C”
IC 3954A-TN400 Dealer Installed security transmitter 00056ADU10:IC 3954A-TN400 Dealer Installed security transmitter 00056ADU10
Buttons:6; Panic, Lock, Trunk, Unlock, Find, Car Starter
Features:Remote Start,Trunk Release,ready to program TESTED Works 100% Battery installed OEM Factory,keyless remote entry key fob keyfob control transmitter car start,engine vehicle starter system clicker beeper controller keyfob,dealer installed car starter keyfab fab phob keyphob control beep
Country/Region of Manufacture:Unknown
Unit Quantity:1

Why purchase a recycled keyless entry remote transmitter? The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today! The programming instructions are included in the package. This remote can often be found on Ford vehicles. This remote is from a dealership-installed remote start system. That means that if you buy a car brand new from the Mazda, Ford, Hyundai, Kia dealership and it had no remote start and they sold you that upsell they would install it at the dealership. What are you purchasing? This is ONE (1) Factory OEM (Original Equipment Manufacturer) keyless entry remote, aka “key fob” that will work with your OEM Factory installed RKE system. Compatibility: Works with vehicles that use a factory keyless entry system listed in our compatibility section above AND below. FCC ID#(s) FCC ID GOH-PCGEN2 GOHPCGEN2 G0HPCGEN2 Alternate Spellings GOHPCGEN2 GOH PCGEN2 GOH-PCGEN2 G0H-PCGEN2 Code Systems Inc Car Alarm Transmitter -PCGEN2 codealarm Part #(s) 7L3J-15K601-AA 7L3J15K601AA 8L3D-15K601-AA 8L3D15K601AA 1032268 P/N 0000-8F-H07 00008FH07 IC 3954A-TN400 P3465 00056-ADU10 00056ADU10 3954ATN400 3954ATN4OO TN4oo U8560-00000 U856000000 0000-8F-F06 00008FF06 oooo-8F-Fo6 oooo8FFo6 Dealer #(s) 0000-8F-H07 Compatible Vehicles FOR THIS FCC ID / PART # Ford E-150 2009 2010 2011 2012 2013 2014 Ford E-250 2009 2010 2011 2012 2013 2014 2015 Ford E-350 Super Duty 2009 2010 2011 2012 2013 2014 2015 Ford E-450 Super Duty 2009 2010 2011 2012 2013 2014 2015 Ford Edge 2007 2008 2009 2010 Ford Escape 2009 Ford Explorer 2009 2010 Ford Explorer Sport Trac 2009 2010 Ford F-150 2009 Ford Focus 2009 Ford Fusion 2007 2008 2009 Ford Mustang 2009 2010 Ford Ranger 2009 2010 2011 Ford Taurus 2009 Ford Taurus X 2009 Hyundai Sonata 2011 2012 2013 2014 Hyundai Tuscon 2011 2012 2013 Kia Forte 2010 2011 2012 2013 2014 Kia Optima 2007 2009 2010 2011 2012 2013 2014 Kia Sportage 2010 2009 2010 2011 2012 2013 2014 Kia Rondo 2007 2008 2009 2010 2011 2012 2013 2014 Kia Soul 2010 2011 2012 2013 Kia Sorento 2010 2011 2012 2013 2014 Lincoln Mark LT 2007 2008 Lincoln MKX 2007 2008 2009 2010 Lincoln MKZ 2009 Mazda 3 Mazda3 2000 2001 2002 2004 2005 2006 2007 2008 Mazda 626 2000 2001 2002 2003 2004 2005 2006 2007 2008 Mazda CX-7 CX7 2000 2001 2002 2003 2004 2005 2006 2007 2008 Mazda Millenia 2000 2001 2002 2003 2004 2005 2006 2007 2008 Mazda Protege 2000 2001 2002 2003 2004 2005 2006 2007 2008 Mazda Tribute 2008 2009 2010 2011 Mercury Grand Marquis 2009 Mercury Mariner 2009 Mercury Milan 2009 Mercury Mountaineer 2009 2010 Mercury Sable 2009 Button Count 6: Panic, #1, #2, Lock, Door Locker, Door Unlocker, Unlock, Car Engine Vehicle Starter, Panic Alarm Horn Battery (installed) 2; CR2016 Frequency 434 MHz 434MHz 318 MHz (318MHz) LED Light Color N/A Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. The following programming instructions will ONLY work HYUNDAI KIA Vehicles with this remote and on the following models and years: Open the driver’s door.Turn the vehicle ignition to the “ON” position, do not start the engine. Locate the disarm/programming button. (The disarm/programming button is secured to the remote start wire harness, located behind the lower dash finish panel.)Press and hold the disarm/programming button for 10-15 seconds, the horn will beep 3 times. Release the darm/programming button. Press the Panic button on the remote ONE TIME, the horn will beep one time indicating that the transmitter code has been learned. Repeat this process for each additional transmitters. Turn OFF vehicle ignition. Test remote(s). The following programming instructions will ONLY work on the following models and years: 2004 – 2008 Mazda 3 2000 – 2002 Mazda 626 2007 – 2008 Mazda CX-7 2000 – 2002 Mazda Millenia 2000 – 2003 Mazda Protoge If you have a model and a year that is not listed above then you’ll need to contact an automotive locksmith in your area to come out and program the remote in. The cost for remote programming will vary depending on your location. 1. Get in vehicle and close all doors, then open the drivers door and leave it open. 2. Within 24 seconds you must insert key into the ignition and cycle the ignition switch to ON and then OFF three times and leave the key in the ignition. Then close and open the drivers door three times. 3. When done properly the doors will automatically lock and then unlock. Now the vehicle is in programming mode. If locks do not cycle you must start the procedure over. 4. Push any button twice on the first remote to be programmed. The door locks will cycle automatically to indicate successful programming. If there is only one remote to be programmed to the vehicle you must push any button twice again on the same remote, wait for locks to cycle, then push any button twice one more time on the same remote. If there are two remotes to be programmed then press any button on the second remote twice, wait for locks to cycle, then push any button twice again on the second remote. To program three remotes to this vehicle you must press button twice on second remote, wait for locks to cycle, then press any button twice on the third remote. 5. Programming is now complete. Close the door and test remotes to ensure proper programming. Method #1 ____________________ 1. Open the driver side door 2. Lock and then unlock the door using the button on the door. 3. Leave the door open. 4. Insert a key into the ignition and turn the car to the ON position. Leave for about 2 or 3 seconds, then turn off. Repeat this two more times (3 in total). Leave the key in the slot in the OFF position. 5. Close the driver’s door. Then open it. Then close it. Then open it. Then close it. Then open it. 6. The onboard computer will respond by locking and unlocking all the doors at this point. That means it’s ready to accept FOB programming 7. Press a button on each FOB unit to program it to the computer. When you are done programming FOBs, you can simply remove the key, which causes the computer to cycle the door locks once more. Programming Procedure: A. Open the driver’s door (press and hold in brake pedal on Remote Start only system – RMST); Note: On vehicles with negative polarity door ajar switch input circuits (Refer to the vehicle specific programming section), the door is closed during this step unless door ajar switch input polarity option has been previously changed to negative. B. Turn the ignition key to ON or RUN position. C. Press and hold the programming/override button. After 10 secons the horn will chirp 3 times indicating the system is no in programming mode. D. Release the programming/override button. E. Press the transmitter button 1 (Lock button on RKE/VSS/RMST, except RMST system which is remote start button) on the remote. The horn will chirp one tome to indicate that the remote has been programmed. The following vehicles can use this remote when equipped with the dealer installed keyless entry system: ______________________ Method #2 ________________________ 1. Remove key from ignition. 2. Close all doors. 3. Open driver side door and leave open. 4. Perform the following steps within 24 seconds. a. Insert key in ignition. b. Turn key to ON and OFF. c. Repeat step b two more times. d. Remove key. e. Push driver door frame button three times (black rubber button located on driver door frame that tell the vehicle whether or not door is closed.) 5. Buzz sound, chime or doors will lock and unlock should be heard at this point signaling that the vehicle is now in programming mode. If not, wait 40 seconds and return to step 4. 6. All transmitters need to be programmed at this time, including the old ones. Push any button on the transmitter two times. A buzz sound, chime or doors locking and unlocking should be heard at this point signaling that the vehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times using the only transmitter. If there are two transmitters, repeat this step two more times using the second transmitter. 7. Push driver door frame button one time. Two buzz sounds, chimes or doors locking and unlocking 2 times should be heard at this point signaling successful programming. Condition Notes Pre-Owned; Remote has faded button graphics and a chip in the case – see photos ready to be programmed to your vehicle’s compatible factory installed RKE system Installed RKE System Type: Please be sure you have a FACTORY (RKE) remote keyless entry system. It was not standard on all vehicles. If your current remote looks the same then this will work. Other options include: Dealer Installed or Aftermarket. The system installed in your vehicle will CHANGE the required remote. If you are unsure ask your local dealer they will need your VIN # (Vehicle Identification Number (located on our vehicle registration car, on your driver side door jam, or your windshield (lower left drives side))). Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions: 1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems. 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following: i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote) ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?) 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems). 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems). 6. There are also many auto forums that you can go onto by just conducting a google search with your questions. 7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.

Frequently Asked Questions About HYUNDAI OEM 6 Button Key Fob Dealer Installed Remote Car Starter GOH-PCGEN2 fab in My Website

thebusmods.com is the best online shopping platform where you can buy HYUNDAI OEM 6 Button Key Fob Dealer Installed Remote Car Starter GOH-PCGEN2 fab from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling HYUNDAI OEM 6 Button Key Fob Dealer Installed Remote Car Starter GOH-PCGEN2 fab on thebusmods.com?

Frequently Asked Questions About HYUNDAI OEM 6 Button Key Fob Dealer Installed Remote Car Starter GOH-PCGEN2 fab in My Website

What are the best-selling HYUNDAI OEM 6 Button Key Fob Dealer Installed Remote Car Starter GOH-PCGEN2 fab on thebusmods.com?

Leave a Reply Cancel reply