FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone

$48.93 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location:
Ships to: US,
Item: 175481405287

eBay FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone Fixed Wings Gliders FTr4 adopts AFHDS 3, Flysky s third-generation automatic frequency hopping digital system. It uses a single-antenna bidirectional transmission system and is uniquely designed to save space and output standard PWM, PPM, i BUS and S.Bus signals. Description: Brand Name: FlySky Item Name: FTr4 Receiver PWM Channels: 4 RF.2. 4GHZ 2. 4G Protocol: AFHDS 3 Distance: >500m (Range without interference 1m from the ground) Antenna: Single Antenna put Power: 3.5-8.4V RSSI: Yes Data Output: PWM/PPM/i BUS/S BUS Temperature Range:15°C-+60°C Humidity Limit: 20%-95% Online Update: Yes Dimensions: 33.7*20*107mm Weight: 4.9g Certification: CE, FCC ID N4ZFGR4P00 Binding: 1. Insert the bind cable into the receivers bind port 2. Plug the power cable into any other port, and the receivers LED will start to flash quickly indicating that it has entered bind mode 3. Put the transmitter into bind mode; (See the transmitters instruction manual for more information) 4. Binding is successful when the receivers LED will stop flashing Remove the power and bind cables from the receiver. 5. Reconnect the power cable to the receiver 6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again. Note: Ports used to connect the receiver to the various components BAT: Separate power supply interface for the receiver BIND: For bind cable i BUS: Connects to the i bus module for channel expansion CH 1-CH 4: Connects the servos, power supply or other components Note: Refer to the transmitter’s or sensor’s user manual for further information on how to connect and set up sensors If after an update the transmitter is unable to connect or bind to the receiver, it is necessary to put the receiver into forced update mode 1. nsert the bind cable and CH4 as shown to short the pins and enter forced update mode 2. Then go to the RX Setup menu and select RX update as normal 3. updating is successful when the receiver status indicator flashes slowly This function protects the user by preventing the model from behaving unexpectedly if signal is lost. Make sure to setup the failsafe function on the transmitter. For more information on setting up the failsafe refer to the transmitters user manual – When a receiver has been rebound to the transmitter the failsafe function will reset to its default settings Attention: Make sure the product is installed and calibrated correctly, failure to do so may result in serious injury. Make sure the receiver’s battery is disconnected before turning off the transmitter, failure to do so may lead to unintended operation or loss of control. Make sure the receiver is mounted away from motors, electronic speed controllers or any device that emits excessive electrical noise. Keep the receiver’s antenna at least 1 cm away from conductive materials such as carbon or metal. Do not power on the receiver during the setup process to prevent loss of control. Shipping: The shipping costs to all countries are the same. Item will be shipped within 1-2 business days Items will be checked carefully before sent out. We will use air bubbles to wrap the items carefully Sales Tax: Sales Tax Depends on the import tax policy of your country. Warranty & return: For ensuring all the items are in good quality, we will test all products before the packages were sent out . 30 days warranty from the purchased date. Please contact us via email before returning the defective item. Return items should include the original packaging and all accessories. Only defective product will be offered exchange. Contact us : Our office hours are : – 8:30 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday – 8:30 a.m. to 1:00 p.m. (GMT +8) of Saturday – 8:30 a.m. to 6:00 p.m. (GMT +8) of Sunday – Our office is closed on public holidays (China). We apologize for the late reply during the holidays. We have always been trying to provide the best service and reliable products for every customer. Please contact us to resolve any issue before leaving negative feedback . we will assist you in any way possible and aim to answer all emails .

Frequently Asked Questions About FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone in My Website

thebusmods.com is the best online shopping platform where you can buy FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone on thebusmods.com?

Frequently Asked Questions About FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone in My Website

What are the best-selling FlySky FTr4 2.4GHz 4CH AFHDS 3 RC Receiver for flysky NB4 PL18 RC Drone on thebusmods.com?

Leave a Reply Cancel reply