Autronica BSL-310 Communication Card Loop Driver Module New 1-Year Warranty DHL

$350.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store marineservice92
(56) 94.7%,

Location: BANGALORE, KARNATAKA
Ships to: US,
Item: 385246461634

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Autronica:Autronica
Type:Communication Card Loop Driver Module
BSL-310:BSL-310
MPN:BSL-310

P-BSD310/CE – Rev. F, 2005-09-26 Protecting life, environment and property…Loop Driver Module – BSD-310/ BSD-311AutroSafeFeatures• Each Loop Driver Module allows connection of 127 loop units• Monitoring function for break or short-circuiting on the de-tection loop• Fail_Safe function ensures continuous communication on the detection loop• Easily plugged onto each other or onto other I/O modules on a standard mounting rail• Automatic addressing of the I/O module• Designed to meet EN-54 and LPCB requirements and con-forms to CE standardsApplicationsThe Loop Driver Module functions as a modem for data ex-change between the control system and the detection loop. The Loop Driver Module is easily plugged onto a mounting rail inside the Fire Alarm Control Panel (BS-310/320) or the Controller (BC-320).1 detection loop for connection of 127 loop units can be con-nected to each Loop Driver Module. A loop unit is defined as either a point (i.e. a detector or a manual call-point), I/O-unit or an electronic sounder.In addition to its main function, the I/O module provides two important monitoring and security features. The loop resis-tance on the detection loop is continuously monitored to reg-ister a possible break or short-circuit on the detection loop.If a communication failure occurs, a Fail_Safe function is automatically activated. A low-frequency modulation on the loop will be detected, and a separate control output (F/S) will then be activated.The I/O module will automatically detect its own address, no Dip-switch or jumper settings are required.VersionsThe Loop Driver Module normally comes in two versions, BSD-310 and BSD-311. The BSD-311 is a high-power ver-sion (refer to technical specifications).Optionally there is a BSD-310/N version for use when there are zone 2 detectors of type EXn on the loop. This is fortype /N detectors only.Capacity / LimitationsThere can be a maximum of 6 Loop Driver Modules in each Fire Alarm Control Panel or Controller.The maximum number of detectors and manual call-points that can be connected to these 6 modules are 512 (refer to EN-54).Due to maximum loading, the maximum number of detectors and manual call-points connected to each Loop Driver Mod-ule BSD-310 is 100. The remaining 27 loop units on each Loop Driver Module can be used for I/O signals. Reducing the number of detectors will allow the use of more I/O signals.Indicators / Connections Screwterminal 1RedindicatorH1GreenindicatorH5Front view when mounted on railScrewterminal 10• Green indicator, H5. Communication indicator that gives a pulsing green light during traffic.• Red indicator, H1. Fail_Safe indicator that gives a steady red light if a communication failure occurs, i.e. the system does not respond to an alarm.The I/O module has the following connections:Screw Terminal no.Signal1OUT + (+24V)2OUT – OV3Shield4IN +5IN -6Shield7F/S +8F/S -9Chassis10ChassisLoop Driver Module, BSD-310Technical SpecificationsDimensions (mm)95x89x32Weight (g)81MaterialsTop and bottom: Zytel FR7200Snap-on mounting device: Zytel 7335SMountingOnto a standard mounting rail inside the Fire Alarm Control Panel or Controller.Electrical connectionInternal system: plug-in connection Detection Loop: screw terminals (maximum cable dimension 2,5mm2)Loop output voltage24V DCMaximum current output to loop (24VREG)100 mA (BSD-310)200 mA (BSD-311)Internal current consumption24VREG, idle: 10 mA 24VREG, 12,5% communication capacity: 26 mAOutput resistance (Ohm) measuring accuracy on the loop+/-15%Loop resistance measuring range0-300 OhmMaximum capacitance on loop cableBSD-310 and BSD-311: 500 nFMaximum resistance on the total cable length (+ and – conductors)BSD-310: 50 Ohm (each wire maximum 25 Ohm)BDS-311: 20 Ohm (each wire maximum 10 Ohm)Fail safe (F/S) output signal10 ms OFF, 20 ms ONCertificate for BSD-310/NNEMKO 03ATEX217XAutronica Fire and Security ASFire and Security, Trondheim, Norway. Phone: + 47 73 58 25 00, fax: + 47 73 58 25 01.Oil & Gas, Stavanger, Norway. Phone: + 47 51 84 09 00, fax: + 47 51 84 09 99.Visit Autronica Fire and Security’s Web site: www.autronicafire.comOrder NumbersOrder numbersDescriptionBSD-310Loop Driver ModuleBSD-311Loop Driver Module H.P.BSD-310/NLoop Driver Module Certified to drive EXn detectors inside zone 2Installation OverviewSchematics – Detection Loop 24V DC OutIn124563+-+-Detector312321312BSD-310Schematics – F/S Output Signal 87-+F/S SignalFrom previous Loop Driver ModuleTo next Loop Driver ModuleLoopDriver Module PRESS HERETRYKK HERKNUS GLASSETBREAK GLASSLoop DriverModuleDetectorI/O UnitManual Call PointBN- 320BRANNALARMTilpasningsenhetFIRE ALARMInterface unitNr.No.BN- 320BRANNALARMTilpasningsenhetFIRE ALARMInterface unitNr.No.

Frequently Asked Questions About Autronica BSL-310 Communication Card Loop Driver Module New 1-Year Warranty DHL in My Website

thebusmods.com is the best online shopping platform where you can buy Autronica BSL-310 Communication Card Loop Driver Module New 1-Year Warranty DHL from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Autronica BSL-310 Communication Card Loop Driver Module New 1-Year Warranty DHL on thebusmods.com?

Frequently Asked Questions About Autronica BSL-310 Communication Card Loop Driver Module New 1-Year Warranty DHL in My Website

What are the best-selling Autronica BSL-310 Communication Card Loop Driver Module New 1-Year Warranty DHL on thebusmods.com?

Leave a Reply Cancel reply