19.6×23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light – The Bus Mods – Omsi 2 Mods

19.6x23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light

$493.05 Buy It Now or Best Offer
free,30-Day Returns

Seller Store yaxun_shopping23
(3861) 99.1%,

Location: Rancho Cucamonga, California
Ships to: US,
Item: 143679838084

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Size:20 x 24 in
Number of Press Stations:1 Station
Screen/Frame Type:Pre-Stretched
Type:Vacuum Exposure Unit
Exposure Unit Type:LED
Exposure Unit Form:Tabletop
MPN:219109
Exposure Unit Bulb Type:LED
Ink Type:Water Based Ink
Automation Type:Automatic
techtognda:techtognda
Number of Color Stations:1 Color
Belt Size:20 in
Voltage:110 V

LED Vacuum Exposure Unit This vacuum UV exposure unit mainly used for exposure precise screens; the external pump is connected with main engine; it will make the screens and transparency film close on the glass tightly by evacuating the air of the vacuum charmer; exposure quality is high, especially for precise screens. There are 12pcs LED light tubes. Can not use 20×24 inch screen ! much be smaller than 19.6″x23.6 ” The machine adopts timer to set the exposing time; the timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save. Please note: Different brand of emulsion have different exposing time, the operator need to use the emulsion in this machine and confirm the best exposing time. Operation steps : 1.Connect the vacuum pump pipe with the exhaust pipe. 2.Plug the vacuum pump power into the socket. 3.Turn on the machine, adjust the Settings of exposure time. 4.Put the film and plate on the glass and adjust the position. 5.Put the four sledge foots on the four corners of the screen frame. 6.Close the cover, fit the hook locked; Vacuum pump starts exposing at the same time. 7.After 5 minutes of exposing ,the rubber cloth is closely fit with the mesh in the screen frame. 8.Press the timer “start/pause” button to expose. 9.When the exposing time is over, the tubes will be off automatically ;open the exhaust valve, the exposure will be disappear. 10.Turn off the power of the machine, and take out the screen frame. The exposure is finished. Product color Blue Machine surface treatment Electrostatic spraying Machine using material Steel plate Attachment material Stainless steel or zinc plating, nickel plating Voltage 110V Machine size 28x24x9.4 inch Packing material Wooden case Max Screen size 20×24 in Net weight 79lb Gross weight 97lb Character: * The rubber cloth and seal ring adopts Taiwan produces high quality materials; Good stretch elasticity, sealed well. * External high speed vacuum pump; Vibration is small; noise is small; vacuum degree is 5Pa;it can work for 24 hours. * Equipped with 8mm Tempered glass plate, resistant to friction; the glass is broken, the glass shards are no sharp, to ensure the safety of operator. * The timer can set the exposing time, after reach the exposing time, the machine automatically turns off the tubes. * The timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save. * Set the release valve, after the exposure and open the release valve, remove the vacuum, open the cover and remove the screen. * This machine is equipped with four soft plastic pad feet, place on the corner of frame, during the vacuum, prevent the corner of frame damage the rubber cloth. Time controller Setting 1. Before using, please press the “C” button to reset, the display shows 00:00 00 and it is flashing state. 2. Press the “hour” and “minute” and “second” button separately to set the countdown of the electrify time, the display shows “ON”. 3. Press the “start/pause” button to start the countdown. For example: set exposure time 5 minutes 30 seconds : At first press the “C” button to remove the original set ; Then press “minute” set to”5″; press “seconds” set to “30”; Then press the “start/pause” to start the countdown, l amp open; After five minute 30 seconds countdown , plate burning machine tube closed. This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds. Basic parameters of the timer: Countdown: 1 SEC – 99 hours 59 minutes and 59 seconds Working temperature: – 25 c – 65 c Note: Pump need to add engine oil before using, no oil damage the motor. Periodic inspection is required. Item Included: LED light Vacuum Exposure Unit —- 219109 On Sep-24-20 at 23:41:08 PDT, seller added the following information:

Frequently Asked Questions About 19.6×23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light in My Website

thebusmods.com is the best online shopping platform where you can buy 19.6×23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light from renowned brand(s). thebusmods.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 19.6×23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light on thebusmods.com?

Frequently Asked Questions About 19.6×23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light in My Website

What are the best-selling 19.6×23.6 Vacuum Exposure Unit Screen Printing Plate Making Machine LED light on thebusmods.com?

Leave a Reply Cancel reply